Storage; Disposal; What If There Are Problems; Technical Data - Beurer FWM 50 Instrucciones De Uso

IMPORTANT
Please note that the foot warmer must not be washed, chemically cleaned, wrung out, tumble dried,
put through a mangle or ironed. Failure to observe this may result in damage to the foot warmer.
The removable lining is machine washable at 30°.
Use a delicate laundry detergent and measure it out according to the manufacturer's instructions.
IMPORTANT
Only use the foot warmer again once the foot warmer and lining have fully dried. Otherwise, there is
a risk of damage.

7. Storage

If you do not plan to use the foot warmer for a long period of time, we recommend that you store it in the
original packaging.
IMPORTANT
Please allow the foot warmer to cool down before storing. Failure to ob-
serve this may result in damage to the foot warmer. To avoid damaging
the foot warmer, do not place any objects on top of it whilst storing.

8. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its useful life.
Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accordance
with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions, please
contact the local authorities responsible for waste disposal.

9. What if there are problems?

Problem
The foot warmer does not warm up or the massage function
cannot be activated while:
– the mains part is connected to a working socket.
– the mains part cable is connected to the connector socket on
the foot warmer.
– both functions (heat + massage) are switched on.

10. Technical data

For technical data about the foot warmer, see the type plate label on the foot warmer.
For technical data about the mains part, see the type plate label on the mains part.
Permissible mains parts:
EU mains plug: S024FV1200200
EU mains plug: RSS1006-240120-W2E-H
UK mains plug: RSS1006-240120-W3U-H
Cause
The foot warmer
is faulty.
12
Solution
Send the foot
warmer for servicing.