GE AGH08 Manual Del Propietario E Instrucciones De Instalación página 11

INSTALL THE CASE IN THE
5
WINDOW
Open the window and mark the centerline
A
of the window stool.
Carefully place the case on the window
B
stool and align the center mark on the
bottom front with the centerline of the stool.
Pull the window down behind the top
C
mounting rail.
NOTE: Do not shut the window so tightly that
movement of the accordion panels is
restricted.
Loosely assemble the sill supports.
D
INDOOR
Bolt
Select the position that will place the sill
E
supports near the outermost point on the
sill. Attach the sill supports to the case track
hole in relation to the selected position
using 2 type A screws in each support.
Frame guide
Installation Instructions
OUTDOOR
Sill support
Nut
INSTALL THE CASE IN THE
5
WINDOW (CONT.)
Adjust the bolt and the nut in each support
F
so that the case is installed with a slight tilt
to the outside. Use a level; about 1/3 bubble
will be the correct case slant to the outside.
Sill
support
Secure the case to the window stool by
G
using 3 type B screws.
Pull the accordion panels to each window
H
sash track. Attach them on each side to the
window sash and the window stool using
4 type C screws.
11