Bosch Professional GBH 240 Manual Original página 15

14 | English
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Power tools with electronic control and right/left
rotation are also suitable for screwdriving.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Keyless quick-change chuck (GBH 240 F)
(2) SDS plus quick-change chuck
Technical Data
Rotary hammer
Article number
Speed control
Stop rotation
Clockwise/anticlockwise rotation
Quick-change chuck
Rated power input
Impact rate
Impact energy per stroke according to
EPTA-Procedure 05:2016
Rated speed
Tool holder
Spindle collar diameter
Max. drilling diameter:
1 609 92A 3SE | (10.03.2021)
(3) SDS plus tool holder
(4) Dust protection cap
(5) Locking sleeve
(6) Locking ring for quick-change chuck (GBH 240 F)
(7) Rotational direction switch
(8) Lock-on button for on/off switch
(9) On/off switch
(10) Release button for impact/mode selector switch
(11) Impact/mode selector switch
(12) Button for depth stop adjustment
(13) Depth stop
(14) Auxiliary handle (insulated gripping surface)
(15) Handle (insulated gripping surface)
(16) Securing screw for keyed chuck
(17) Keyed chuck
(18) SDS plus shank for drill chuck
(19) Drill chuck holder (GBH 240 F)
(20) Front sleeve of the keyless quick-change chuck
(GBH 240 F)
(21) Retaining ring of the keyless quick-change chuck
(GBH 240 F)
(22) Saugfix suction opening
(23) Saugfix clamping screw
(24) Saugfix depth stop
(25) Saugfix telescopic tube
(26) Saugfix wing bolt
(27) Saugfix guide tube
(28) Universal holder with SDS plus shank
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
3 611 B72 1..
W
-1 min
J
-1
min
mm
Автотовары «130»
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
GBH 240 GBH 240 F
3 611 B73 0..
●
●
●
–
790
0–4200
2.7
0–930
SDS plus SDS max
48.5
Bosch Power Tools
●
●
●
●
790
0–4200
2.7
0–930
48.5