LG LSDE388VS El Manual Del Propietario página 41

BEFORE CALLING FOR SERVICE
Problem Possible Causes
Steam doesn't
• Water level error.
generate but no error
code is shown.
Garments still • Too many or too different
wrinkled after
types of garments in dryer.
STEAMFRESH .
™
There are no creases • The function of this cycle
left on garment after
is to remove wrinkles from
STEAMFRESH .
™
fabric.
Garments have
• This is normal.
static after REDUCE
STATIC.
Garments are too
• Correct drying options not
damp or too dry after
selected.
REDUCE STATIC.
Garments are not
• This is normal.
uniformly damp after
EASY IRON.
Water drips from door • This is normal.
during Steam Cycle.
Steam is not visible • This is normal.
during Steam Cycle.
Drum does not turn
• This is normal.
during Steam Cycle.
Cannot see steam
• This is normal.
vapor at the
beginning of cycle.
The display shows
• MORE TIME button pressed.
BULKY LOAD.
Odors remain in
• STEAMFRESH
clothing after
remove odor completely.
STEAMFRESH .
™
CHECK FILTER light
• Lint filter is almost clogged
is on during the
or full.
drying cycle
• Ductwork is slightly too
2 bars are displayed
long or has too many
In the LCD screen.
turns/restrictions.
• Partial blockage of the
ductwork due to lint buildup.
END OF CYCLE
FIN DEL CICLO
4 bars are displayed • Ductwork is too long or has
too many turns/restrictions.
In the LCD screen.
• Significant blockage of the
NEED FLOW CHECK
ductwork due to lint buildup
THE DUCTWORK HAS
A BLOCKAGE THAT NEEDS or debris.
TO BE REMOVED
IMMEDIATELY.
FIN DE CYCLE
(cont.)
Solutions
• Unplug dryer and call for service.
• Small loads of 1 to 5 items work best.
• Load fewer garments. Load similar-type garments.
• Use an iron to make creases.
• Depends on individual moisture level in skin.
• Select load weight manually before starting
REDUCE STATIC option.
• Depends on the amount or type of garments.
• This is steam condensation on door surface.
• Steam vapor is difficult to see when the door is
closed.
• The drum is turned off so that the steam vapor
remains in the drum.
• Steam is released at different stages of the cycle
for each option.
• Pressing the MORE TIME button several times will
set the cycle for a large load such as a comforter.
• Fabrics containing strong odors should be
did not
™
washed in a normal cycle.
• Pause the drying cycle and clean the lint filter.
• Install a shorter or straighter duct run. See the
Installation Instructions.
• Ductwork should be checked/cleaned soon.
Dryer can be used in this condition, but drying times
may be longer.
• If "END OF CYCLE" is displayed after the end of
cycle, it will be off in 4 minutes. If POWER button
is pressed or the door is opened, power will be off
immediately.
• Install a shorter or straighter duct run. See the
Installation Instructions.
• D uctwork should be checked/cleaned soon.
Dryer can be used in this condition, but drying times
may be longer.
• I f "NEED FLOW CHECK" is displayed after the end
of cycle, it will be off in 2 hours. If POWER button
is pressed or the door is opened, power will be off
immediately.
41