EN
HOW TO USE
This lamp is fully protected against dust and splashing water. It is intended for indoor and out-
door use. The charger is designed for indoor use ONLY away from moisture. Not to be charged
CHARGING THE PRODUCT FOR THE FIRST TIME
•
Press « ON/OFF » button on the base of the lamp to switch off
the LED before charging.
•
Connect the adapter to the charging socket in the base
of the lamp. Then plug the charger in. The charging light
will be red.
•
For the first recharge, the lamp must remain on charge for 12
hours. Subsequently the battery will take approximately 10
hours to recharge.
LED BEHAVIOR
•
RED : charging.
•
LED off : battery charged OR adapter not plugged.
USING THE LAMP
Simply press the « ON/OFF » switch to light up, switch off and
change the colour mode of the lamp.
•
To light up : press the switch button once.
•
To change colour press again.
•
To switch off : press button for three seconds.
It is also possible to use the remote control :
R
R
. . . . . . . . . . . . . . . . . . . .
G B
G B
ON
. . . . . . . . . . . . . . . . . . . . . . . . .
OFF
. . . . . . . . . . . . . . . . . . . . . . .
COLOR SELECTION
FLASH MODE
. . . . . . . . . . . .
STROBE MODE
. . . . . . . . . .
FADE MODE
. . . . . . . . . . . . .
SMOOTH MODE
. . . . . . . . .
14
Adjust the level of light
Switch on the LED
Switch off the LED
Choose a colour from the 16 available
. . . .
Continuous automatic colour change
Very fast automatic colour change
Automatic colour change with the colours fading into one another
Automatic colour change with the colours fading into one another slowly
outdoors.
20/11/2019