Possible Error Messages After Switch-On; No Hard Disk Installed; Hard Disk Not Formatted - Monacor IOR-204 Manual De Instrucciones

5) Click "System" at the top of the menu.
Parameter Aufnahme Suche
Allgemein
DATUM
Allgemein
Datumsformat
Zeitformat
DST
Sprache
NTP
Video Format
Nutzer
Anzeigezeit des Menüs
Info
Show wizard
Protokol
Intelligent Ana
Fig. 7-4 Menu "System"
6) In the line "Sprache", select ENGLISCH.
7) Click the button "Sicherung" at the bottom of the menu.
8) The message "Speicherung erfolgreich" will appear. Click
"OK" to confirm the message.
9) Restart the recorder to display the menus in the language
selected and to start the "Startup Wizard":
a) Click "Herunterfahren" at the top of the menu.
b) The window "Herunterfahren" will appear. Click
"Wieder Starten": The recorder will be restarted and
the menu language will be English.
In the following text, all menus are shown in English.

7.2 Possible error messages after switch-on

According to the factory settings of the recorder, an alarm
signal will sound for 10 seconds when an error occurs.

7.2.1 No hard disk installed

Warning
1 No disk
Fig. 7-5 No hard disk installed
It is possible that this message is hidden by the window of
the startup wizard. However, the warning icon
additionally be shown at the bottom of the screen. Please refer
to page 36 (chapter 6.1) for information on how to install
a hard disk. First, shut down the recorder properly:
1) Click × to close the "Disk Warning" window.
2) In the window "Startup Wizard", click "Cancel." The con-
firmation box "Are you sure you want to cancel Startup
Wizard" will appear. Click "OK".
3) To show the toolbar, press the right mouse button or move
the mouse pointer to the centre of the lower edge of the
screen.
4) Click the icon
5) In the main menu, click the icon
following window will appear:
Shutdown
User Name I a dmin
Password
Shutdown Reboot
Fig. 7-6 "Shutdown" window
6) Click "Shutdown". The following information will appear:
38
i
Gerät System Erweitert
04/03/2018 Zeit 11:04:56
30
MM/TT/JJ
12STD.
DEUTSCH
PAL
30s
Default
×
"Main Menu".
"Shutdown". The
Cancel
Recording was stopped successfully, you can turn
Herunterfahren
AM
Fig. 7-7 The recorder can now be safely switched off
7) Switch off the recorder with the rocker switch.

7.2.2 Hard disk not formatted

Disk Warning
1
Sicherung Schließen
Fig. 7-8 Hard disk unformatted
It is possible that this message is hidden by the window of the
startup wizard. However, the warning icon
be shown at the bottom of the screen. To format the hard disk:
1) Click × to close the "Disk Warning" window.
2) In the window "Startup Wizard", click "Next". The follow-
ing window will appear:
No.
1
Overwrite
Don't show this window next time.
Fig. 7-9 Window for the hard disk settings of IOR-232POE; for the
The hard disk installed will be shown; the column "Free /
Total" will show the capacity available (here "0" because
the disk has not been formatted yet) and the total capacity.
3) Select the hard disk: In the column "Sele", click the line of
the disk (see mouse pointer in fig. 7-9).
4) Click the button "Format HDD". The window "Login"
will appear.
NO HDD
will
No.
1
Overwrite
Don't show this window next time.
Fig. 7-10 Window "Login"
5) Click "Login". The following confirmation window will
appear:
i
No.
1
Overwrite
Don't show this window next time.
Fig. 7-11 Window to confirm formatting
Warning!
off the power safely now !
×
Unformat
HDD Management
Type Disk Group State Free/Total
RW Group1 Unformat 0M/1863G
Auto
Format HDD
×
Cancel
models IOR-204 and IOR-208, fewer columns are available
HDD Management
Type Disk Group State Free/Total
RW Group1 Unformat 0M/1863G
Login
User I a dmin
Passwort
Login Cancel
Auto
Format HDD
×
Cancel
HDD Management
Type Disk Group State Free/Total
RW Group1 Unformat 0M/1863G
Notice
Entire Data Will Be Erased, Do You Want To
Continue?
OK Cancel
Auto
Format HDD
×
Cancel
H
will additionally
Free Time Edit Sele
0s
Previous Next
Free Time Edit Sele
0s
Previous Next
Free Time Edit Sele
0s
Previous Next