Description Of The Product; Charge Of The Battery - EYENIMAL SMALL BARK CONTROL Manual De Instrucciones

Description of the product

Indicator light:
On/Off indicator
battery level indicator

Charge of the battery

WARNING: it is necessary to fully charge the battery of your EYENIMAL Small Bark Control
collar before the first use.
To charge the battery of your EYENIMAL Small Bark Control collar, your collar must be turned off.
To charge your product, proceed in the following way:
− connect the charger to the charging station
Caution: ensure the cable is plugged in the correct way into the docking station.
The USB logo printed on the cable must be oriented downwards (See Diagram 1.2).
− connect the charger to a wall outlet
− put the collar on the charging station (make sure to respect the orientation of the collar on
the charging station – see Diagram 2). After a few seconds, the indicator light on the collar
starts blinking in green.
− when the battery is fully charged, the green indicator light switch Off
Diagram 1.2
enimal_Small_Bark_Control-fr.indd 15
Diagram 1
+
2 contact points
(short or long)
Gb - 15
Bark detection
contact point
Nylon strap
symbol:
area where the magnet is located
to switch On/Off the collar
or change operating mode
Diagram 2
25/07/2016 15:3