Fanimation KINDRED LP8543LGR Manual Del Usuario página 9

How to Assemble Your Ceiling Fan Blade Holder and Blade Support
2. Position blade support under blade holder and
aligning blade support holes with hole in blade holder.
Make sure the blade support is fully seated against and
install with 1/4˝-20 screws. (Figure 2)
NOTE:
Periodically check blade support hardware and
resecure if necessary.
3. Position blade support under another blade support
and aligning blade support holes with hole in another
blade support. Make sure the blade support is fully
(Figure 3)
4. Secure the blade holder with blade support to the
threaded holes located on the bottom of the motor.
(Figure 4)
NOTE:
Periodically check blade holder hardware and
resecure if necessary.
!
To reduce the risk of personal injury, do not bend the
blade holders when installing, balancing the blades
or cleaning the fan. Do not insert foreign objects in
between the rotating blades.
WARNING
Blade Support
Blade Holder
Pan Head Screw
Pan Head Screw
Motor
Pan Head Screw
9
(continued)
Pan Head Screw
(2 per assembly)
Figure 2
HARDWARE USED:
Blade Support
Pan Head Screw
(1 per assembly)
Blade Support
Figure 3
HARDWARE USED:
Pan Head Screw
(4 per assembly)
Blade Holder with
Blade Support
Figure 4
HARDWARE USED:
x 6
x 3
x 12