7.11 KEYLOCK
The KEYLOCK function enables the user to lock the buttons on the flash unit to
prevent them from inadvertently being pressed. When the KEYLOCK function is
activated, a symbol
appears on the display above three buttons.
Activating the KEYLOCK function:
• Press the
ML
Select
appears on the display.
KEYLOCK
Zoom Ext
• Select the menu option „KEYLOCK" by pressing the
Set
and
be highlighted.
• Confirm the selection of the special function by pres-
sing the
• Select the desired setting with the
KEYLOCK?
buttons.
YES
– When „KEYLOCK YES?" is displayed, the Key-Lock
function is activated.
Set
– When „KEYLOCK NO?" is displayed, the Key-Lock
function is deactivated.
• Press the
Deactivating the KEYLOCK function
TTL
F 5.6
AZoom 35
12 m
ISO 200
for about 3 seconds. The display is reset to its normal state when the KEYLOCK
function is deactivated.
Sel
button repeatedly until „Select"
buttons. The selected menu option will
Set
button.
and
Set
key and confirm the setting.
When a button is pressed, „UNLOCK Press
these keys" is displayed . A corresponding
symbol
is displayed to indicate that
the buttons are locked. To deactivate the
Key-Lock function, press both middle buttons
8 Motor Zoom Reflector
The zoom position of the main reflector can be adjusted for focal lengths of at
least 24 mm (35 mm format). For lenses with focal lengths of 12 mm or more,
the integrated wide-angle diffuser
.
The following zoom positions are available:
24 - 28 - 35 - 50 - 70 - 85 - 105 (focal lengths in mm)
(corresponding to 35 mm format)
☞
When using the wide-angle diffuser
cally moved to the 24 mm position! Because of the wide-angle diffuser,
12 mm appears on the display (see 9).
Automatic zoom adjustment
This causes the zoom position of the main mirror
the lens focal length. "AZoom" and the mirror position will then appear on the
flash unit's display panel.
Manual adjustment of the zoom position with AZoom
The zoom position of the main reflector
unit is used with a camera capable of data transmission, in order to achieve
special lighting effects (such as hot-spot, etc.). See also 6.2.
Once saved, „MZoom" will be indicated on the display.
Resetting to AZoom mode
• Touch the shutter release to begin a data transfer between the flash unit and
the camera.
• Continue changing the zoom position until AZoom appears on the display.
can be positioned over the main reflector
the main reflector
is automati-
to automatically adjust to
can also be changed when the flash
115