Tabla de contenido
+
+
Motor Shaft
Arbre d'entraînement
du moteur
Eje del motor
+
+
Groove
Ranura
Ouverture
Replacing Belt
+
Lift Agitator Up
Unidad del agitador
Soulever l'agitateur
+
End Cap
Tapa del extremo
Bouchon
Replace belt whenever a burning
rubber smell caused by excessive
slippage occurs.
Remove lower plate.
Remove agitator by carefully lifting
out.
Remove worn or broken belt.
Clean agitator.
Loop new belt (Panasonic Type UB8
only) around motor shaft and agitator
pulley; see illustration for correct
belt routing.
Reinstall agitator back into nozzle
housing grooves.
After reinstalling the agitator, turn it
by hand to make sure that belt is not
twisted or pinched and that all
rotating parts turn freely.
Reinstall lower plate.
- 30 -
Tabla de contenido
