Source Selection; Source Selector; About 6 Channel / Dvd In (Fr 755 Only) - Philips FR735 Manual De Instrucciones

SOURCE SELECTION

SOURCE SELECTOR

When selecting a source by turning SOURCE SELECTOR,
the audio inputs – and video inputs (FR 755 only) – with the
corresponding name are activated. The incoming signal is
reproduced by all audio and – if the source includes a video
signal – video outputs of the receiver.
Source selected........Connectors used
6 CH / DVD ...................6 CHANNEL / DVD INPUT audio input
and DVD IN video input (FR 755 only)
TUNER ..........................The tuner part of the receiver is used,
all inputs are switched off.
CD .................................CD IN audio input
CDR/TAPE .....................CDR/TAPE IN audio input
TV..................................TV IN audio input and
TV IN video input (FR 755 only)
VCR ...............................VCR IN audio input and
VCR IN video input (FR 755 only)

About 6 CHANNEL / DVD IN (FR 755 only)

The 6 CHANNEL / DVD IN can be used to connect a device
with a multichannel decoder and 6-channel output connector,
i. e. a high end DVD player.
When using the 6 CHANNEL / DVD IN audio input, the
reveiver works as a multichannel amplifier. The source
reproduces surround sound and sends it to the receiver
divided into the necessary channels. Therefore the
SURROUND ON/OFF, HALL and SURR. MODE button have no
effect since the provided signal is already multichannel.
From a source which is connected to the 6 CHANNEL / DVD IN
audio input cannot be recorded.
16