Danger Of Explosion; Dangers Due To Electrical Power - CASO DESIGN SMG20 Manual Del Usuario

Horno microondas y grill
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 126
Warning
► Never the leave the device unsupervised if you are warming up or cooking foods in
disposable containers made of plastic, paper or other flammable materials.
Disposable containers made of plastic must have the properties shown under the
heading "Notices on microwave cookware".
► Switch off the device or disconnect the power plug and keep the door closed if you
discover smoke, to smother the flames.
► Never use the device to store or dry flammable materials.
► The microwave oven is intended for heating food and beverages. Drying of food or
clothing and heating of warming pads, slippers, sponges, damp cloth and similar
may lead to risk of injury, ignition or fire.
► Always remove grease residues in the device, as these residues can otherwise
ignite.

10.3.4 Danger of explosion

Warning
There is a danger of explosion due to excess pressure that is created in the event
the device is not used properly.
Observe the following safety notices to avoid dangers of an explosion:
► Liquids and other food must not be heated in closed vessels as these may explode.
► When heating food in plastic containers do not leave the appliance unsupervised (risk
of ignition).
► Remove the sealing caps and nipples on baby bottles.
► Do not use dishes with hollow handles and buttons on lids for cooking in which liquid
can get inside the voids if these voids are not sufficiently vented.
► Do not cook eggs in the shell or extremely hard boiled eggs in the device as they can
still explode, even after the microwave operation has been completed.
► Remove twisted wire closures on paper or plastic bags so that no excessive pressure
can develop.

10.3.5 Dangers due to electrical power

Danger
Mortal danger due to electrical power!
Mortal danger exists when coming into contact with live wires or subassemblies!
Observe the following safety notices to avoid dangers due to electrical power:
► If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
► If the connection lead is damaged, you will need to have a special connection lead
installed by an authorized electrician.
caso SMG20
48
Tabla de contenido
loading

Tabla de contenido