Management; Storage; Transport; Weight And Dimensions - Tallas Pumps P1 780 W Instrucciones De Instalación Y Mantenimiento

Electrical P1 Rated absorbed power [W]
data
P2 [W]
USA P2 [HP] Fractional (decimal)
Mains voltage [V]
Mains frequency [Hz]
Current [A]
Capacitor [µF]
Capacitor [Vc]
Hydraulic Max. flow rate [gpm]
data Max. head [ft]
Max. head [psi] Max. pressure [psi]
Max suction depth [ft/min]
Switch-on pressure [psi]
Switch-off pressure [psi]
Pressure indicator
Range of Type of cable
use
Grade of motor protection
Insulation class
Liquid temperature range [F]
to EN 60335-2-41 for domestic use
Max. particle dimension [mm]
Max. ambient temperature [F]
Weight DNM NPT
The pump cannot support the weight of the pipes, which must be supported in some other way.

4. MANAGEMENT

4.1

Storage

All the pumps must be stored in a dry covered place, with possible constant air humidity, free from vibrations and dust.
They are supplied in their original pack in which they must remain until the time of installation.
4.2

Transport

Avoid subjecting the products to needless impacts and collisions.
4.3

Weight and dimensions

The adhesive plate on the packaging indicates the total weight of the pump and its dimensions.

5. WARNINGS

The pumps must never be carried, lifted or allowed to operate suspended from the power cable; use the
handle provided.
 The pump must never be allowed to run when dry.
 It is recommended to open/close the venting/drainage caps (2 and 6) without applying excessive force.
ENGLISH
Model
according
P1=780 W P1= 900 W
780 900
480 600
1/3 (0.33) 1/2 (0.5)
~ 115-120V AC
7.3 8.2
50 50
11.8 13.7
121.4 131.2
53.7 58
16.4/3min 23/<3min
Gauge
SJTOW 16AWG
IP X4 / NEMA 1
+32 F / +95 F
Clean water
Table 2
2
P1=1050 W
1050
750
3/4 (0.75)
60
9.8
40
250
15.0
141.2
62.4 87
26.2/<3min
26.1
46.4
F
104
1'' M