Troubleshooting Guide; Door Reverse - HAEGER RE-90W.015A Manual De Instrucciones

English

Troubleshooting Guide

Temperature inside the compartments is not low enough.
•
Is food preventing the doors from closing properly?
•
Is the thermostat setting correct?
•
Are the air circulation vents blocked?
Temperature inside the refrigerator compartment is too low.
•
Is the thermostat setting correct?
The appliance is excessively noisy.
•
Has the appliance been installed correctly?
•
Are the pipes at the back touching or vibrating?
•
It is normal to hear the noise of the refrigerant liquid in circulation.
The appliance is not working?
•
Is there a power failure?
•
Is the plug properly inserted in the socket?
•
Has the fuse blown?
•
Is the power cord damaged?
Water collects at the bottom of the refrigerator compartment.
•
Is the thermostat setting correct?
•
Is the defrost water drain blocked?

Door Reverse

This refrigerator has been built with the door hinges on the right. If you want to change the
opening direction, please follow the instruction below.
WARNING: When reversing the door, the appliance must not be connected to the mains.
Remove the plug from the mains beforehand.
1. Remove the hole cover. (Fig. 1)
2. Remove hinge cover and top hinge with a "+" screwdriver, then remove the door. (Fig.2)
3. Remove the foot and bottom hinge, fix them to opposite side. (Fig.3)
4. Put on the door to bottom hinge, then fix top hinge and cover. (Fig.4)
5. Fix the hole cover, completed. (Fig.5)
8