Rohde & Schwarz RTH Manual De Instrucciones página 69

®
R&S Scope Rider RTH
2. Turn the wheel until the required value is shown.
3. Press BACK.
Figure 4-6: Set numerical value using the wheel
Data entry using wheel and keypad
You can enter precise numerical values on the keypad. See also
1. Set the focus to the required setting, and press the wheel button twice.
2. Turn the wheel until the focus is on the required number.
3. Press the wheel button.
4. Turn the wheel until the focus is on the required unit.
5. Press the wheel button.
Getting Started 1326.1561.02 ─ 05
Operating the Instrument
Accessing the Functionality
Figure 4-7.
34