SURE petcare SURE FLAT microchip cat flap Manual De Usuario página 9

Step-by-step continued
3
4
5
6
7
The 'Add a Pet' button has some extra features
- Cancel programming your cat's microchip ID into the cat flap
(press the button again for 1 second, after starting Add a Pet mode)
- Wipe the cat flap's memory (hold down for 10 seconds. The catch
will drop down and come back up once complete)
If your cat does not have a microchip, you can buy a Sure Petcare RFID Collar Tag from
surepetcare.com/accessories. To add the tag to the cat flap, repeat steps 2,3 and 5 by
holding the collar tag inside the tunnel, make sure you push the tag against the flap. Do
not wear metal jewellery during this process as it can interfere with the cat flap's sensors.
The catch will now open, allowing your cat to pass through
the flap and the indicator light will flash once every second.
The cat flap is now in Add a Pet mode.
Place some dry food or a treat inside the tunnel as close to
the clear plastic door as possible. The aim is to encourage
your pet to put its head inside the tunnel.
Tip: You could also try using catnip.
When your cat enters the tunnel to eat the food, the sensors
activate and the cat flap saves the microchip ID. Please see
page 23 - Help and support, for tips to encourage your cat to
use the cat flap.
Once your cat's microchip ID has been successfully added,
the flap reverts to standard operation. The indicator light will
stop flashing and the catch will lock (move up) when the cat
has moved away from the cat flap.
The cat flap can store up to 32 cat IDs so if you want to add
more than one just repeat the steps above for each cat. If
your cat flap is already installed, but you want to add an
additional cat then repeat steps 2-6.
EN
8