SURE petcare SURE FLAT microchip cat flap Manual De Usuario página 21

14
15
16
17
18
19
20
Screw the front frame back onto the tunnel. It is
important that these parts are fitted together correctly,
please ensure that the gap between the parts is no
bigger than a credit card thickness. Once screwed
together put battery cover and internal screw covers
back onto your cat flap.
Now you can move to the outside of the house. The extended
tunnel should be poking out of the hole. Place the external
frame over the tunnel.
Mark the position of the two screw holes required to mount the
external frame.
Briefly remove the frame and drill the holes into the wall using
the appropriate drill bit for the material. Once drilled, put the
wall plugs into each of the holes.
Replace the external frame and, using the appropriate screws for
your wall plugs, screw it into position.
Now, insert the two screw caps into the external frame.
Lastly, use an All-Weather sealant to seal the gap between the
tunnel and the external frame. We also recommend putting some
sealant around the join between the external frame and the wall.
EN
20