Cleaning And Maintenance; Washing Instructions - BQS BTW FIX 23 Manual De Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

2. SEAT PARTS AND FITTINGS
A. Headrest.
B. Belt hook.
C. Cover.
D. Armrest.
E. Best height adjuster (15-36 Kg.)
F. ISOCLICK Anchors.
G. ISOCLICK button to uninstall the system (Red)
3. ISOCLICK ANCHORS INSTALLATION. GROUPS 2 AND 3.
To install the chair it is first necessary to
install the ISOCLICK anchor.
To install the chair first install the ISOCLICK anchors and then
each group according to its individual installation.
1. Remove the anchorage rod protectors from the vehicle seat if
present (3.1).
2. Extract the ISOCKLICK Anchors
them 180 degrees from the base of the chair (3.2).
3. Install anchors through the slots in the upholstery between
the back and seat of the vehicle until you hear a "Click" this
means the anchor closure has been locked to the vehicle seat if
installation was correct (3.3, 3.4 y 3.5).
4. To uninstall ISOCLICK anchors press the red button
the ISOCLICK anchors to extract the chair from the vehicle
seat.
14
F
from the chair by rotating
G
and pull
4. INSTALLING CHILD SEAT. GROUP 2 & 3.
Use Group 2 & 3 only from approx.
4 to 12 years of age (15-36 kg)
Make sure you have installed the ISOCLICK anchors before
installing the chair as indicated in Group 2 & 3.
1. Place the child seat on the seat of the vehicle, ensuring it is
pressed firmly against the back of the vehicle seat (4.1).
2. Place the child in the child restraint seat with height adjuster
E
at the child's shoulders (4.2).
3. Fasten the belt, ensuring that the lap belt goes through the
guide under both armrests and that the diagonal shoulder
belt passes through
E
height adjuster on the childrens
shoulder and under the armrest that is next to the vehicle
anchor point. Fasten the seat belt into the vehicle´s buckle
until it "clicks", making sure the child seat is properly
installed (4.3, 4.4, 4.5 y 4.6).

5. CLEANING AND MAINTENANCE

1. Wash the straps and plastic parts with neutral detergent and
warm water.
2. Ensure that no soap enters the buckle or metal parts.
3. Do not use chemicals or bleach on any part of the chair.
4. Dry thoroughly before use.

WASHING INSTRUCTIONS

· The cover is removable and washable at
30º. Dry in the fresh air only.
· Wash in washing machine (cold).
· Do not use bleach.
· Dry clean, with any solvent except
trichloroethylene.
· Do not use dryer.
· Do not iron.
If you have any question about using or installing this product, or if you
need a spare part contact our Customer Service.
EN
15
Tabla de contenido
loading

Tabla de contenido