Victron energy BlueSolar MPPT 150/45-Tr Manual De Instrucciones

BlueSolar charge controllers
MPPT 150/45
Solar charge controller
MPPT 150/70-Tr
Solar charge controller
MPPT 150/70-MC4
Maximum Power Point Tracking
Upper curve:
Output current (I) of a solar panel as function of
output voltage (V).
The maximum power point (MPP) is the point
Pmax along the curve where the product I x V
reaches its peak.
Lower curve:
Output power P = I x V as function of output
voltage.
When using a PWM (not MPPT) controller the
output voltage of the solar panel will be nearly
equal to the voltage of the battery, and will be
lower than Vmp.
Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands
General phone: +31 (0)36 535 97 00 | Fax: +31 (0)36 535 97 40
E-mail: [email protected] | www.victronenergy.com
with screw- or MC4 PV connection
MPPT 150/60 MPPT 150/70
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT
controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up
to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage
curve.
Conventional MPPT's tend to lock to a local MPP, which may not be the optimum MPP.
The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum
MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
Flexible charge algorithm
Fully programmable charge algorithm (see the software page on our website), and eight
preprogrammed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage
for temperature.
Real-time data display options
- Apple and Android smartphones, tablets and other devices:
see the VE.Direct to Bluetooth Smart dongle
- ColorControl panel
BlueSolar charge controller
Battery voltage
Rated charge current
Maximum PV power, 12V 1a,b)
Maximum PV power, 24V 1a,b)
Maximum PV power, 48V 1a,b)
Maximum PV open circuit voltage
Maximum efficiency
Self-consumption
Charge voltage 'absorption'
Charge voltage 'float'
Charge algorithm
Temperature compensation
Protection
Operating temperature
Humidity
Data communication port and
remote on-off
Synchronized parallel operation
Colour
PV terminals 2)
Battery terminals
Protection category
Weight
Dimensions (h x w x d)
Safety
1a) If more PV power is connected, the controller will limit input power to the stated maximum.
1b) PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter minimum PV voltage is Vbat + 1V
2) MC4 models: several splitter pairs will be needed to parallel the strings of solar panels
MPPT 150/45 MPPT 150/60
12 / 24 /48 V Auto Select (software tool needed to select 36 V)
45 A 60 A
650 W 860 W
1300 W 1720 W
2600 W 3440 W
150V absolute maximum coldest conditions
145V start-up and operating maximum
98 %
10 mA
Default setting: 14,4 / 28,8 / 43,2 / 57,6 V (adjustable)
Default setting: 13,8 / 27,6 / 41,4 / 55,2 V (adjustable)
multi-stage adaptive
-16 mV / °C resp. -32 mV / °C
Battery reverse polarity (fuse, not user accessible)
PV reverse polarity / Output short circuit / Over temperature
-30 to +60°C (full rated output up to 40°C)
95 %, non-condensing
VE.Direct (see the data communication white paper on our website)
Not possible
ENCLOSURE
Blue (RAL 5012)
35 mm² / AWG2 (Tr models), or
Dual MC4 connectors (MC4 models)
35 mm² / AWG2
IP43 (electronic components), IP22 (connection area)
3 kg
200 x 250 x 95 mm
STANDARDS
EN/IEC 62109
www.victronenergy.com
MPPT 150/70
70 A
1000 W
2000 W
4000 W