Operation; User Interface Of Pd30Etbxxxbpxxio - CARLO GAVAZZI PD30ETB BP IO Serie Manual De Instrucciones

5. Operation

5.1. User interface of PD30ETBxxxBPxxIO

PD30ETBxxxBPxxIO sensors are equipped with one yellow and one green LED.
Green LED
ON
OFF
OFF
ON
OFF
-
Flashing 0.5...20 Hz
-
-
-
-
-
Flashing 1 Hz
ON 900 ms
OFF 100 ms
Flashing 1 Hz
ON 100 ms
OFF 900 ms
Flashing 2 Hz
50% dutycycle
SIO and IO-Link mode
Yellow LED Power
OFF
OFF
ON
ON
OFF
Flashing 10 Hz
50% dutycycle
50% dutycycle
SIO mode only
Flashing 1 Hz
ON 100 ms
OFF 900 ms
Flashing 1 Hz
ON 900 ms
OFF 100 ms
Flashing 10 Hz
ON 50 ms
OFF 50 ms
Flashing for 2 sec
Flashing 2 Hz
ON 250 ms
OFF 250 ms
Flashing for 2 sec
IO-Link mode only
OFF
ON
Detection
ON
ON OFF (Not stable) SSC1 or LEDs disabled
ON ON (Not stable) SSC1
ON
OFF
ON
ON Timer triggered indication
External teach by wire.
ON
Only for single point mode
ON Teach time window (3 - 6 sec)
ON Teach time out (12 sec)
ON
ON Sensor is in IO-Link mode and SSC1 is stable
ON Sensor is in IO-Link mode and SSC1 is not stable
ON
Rev.00 - 06 .2021 | MAN PD30ETB IO-Link EN | © 2021 | CARLO GAVAZZI Industri
OFF (stable) SSC1
ON (stable) SSC1
Power not connected
Output short-circuit
Teach successful
Find my sensor
35