Installation And Assembly - Astralpool VICTORIA PLUS SILENT VS Manual De Instrucciones

- Follow the steps below before handling the unit:
1. Disconnect the unit from the mains.
2. Block all start-up devices.
3. Check that there is no voltage in the circuits, even in the auxiliary circuits and additional features.
4. Wait for the impeller to come to a complete standstill.
The above list is a guideline only as there may be other requirements in addition to local laws for safety reasons.
- For regular control:
Check that the mechanical parts are tightly secured and check the condition of the screws supporting the
machine.
Check that the power conductors and isolating parts are in their correct position, are secure and in a good
state of repair.
Check the temperature of the machine and the electric motor. In the event of a fault, stop the machine
immediately and contact the nearest Technical Assistance Service.
Check for machine vibrations. In the event of a fault, stop the machine immediately and contact the
nearest Technical Assistance Service.
-Due to the complex nature of the cases described, the installation, user and maintenance instructions con-
tained in this manual do not seek to examine all possible and imaginable cases of service and maintenance.
Should you require additional instructions or have specific problems, please do not hesitate to contact the
nearest Technical Assistance Service.
The electrical installation should be done by someone qualified in working with electrical equipment. This unit is not
designed for those with a physical, sensory or mental handicap or people lacking in experience, unless done under
supervision or with instructions of use from a person in charge of safety.
Do not permit children nor adults to sit or lean on the unit. Children should be supervised to ensure that they do not
play with the unit.
This appliance can be used by children aged from 8 years and above and persons with a reduced physical, sensory, or
mental handicap or lack of experience and expertise if they are supervised or have been given instructions on the safe
use of the appliance and understand the hazards involved.
Cleaning and user maintenance must not be done by children without supervision.

3. INSTALLATION AND ASSEMBLY

GENERAL
- Our pumps may only be assembled and installed in pools or ponds that are compliant with standard HD
384.7.702. Should you have any doubts, please consult your dealer.
- The installation should follow standard IEC 60364-7-702 for swimming pools.
Installation and general maintenance manual - POOL PUMPS
7