Astralpool VICTORIA PLUS SILENT VS Manual De Instrucciones página 10

Ocultar thumbs Ver también para VICTORIA PLUS SILENT VS:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
5. MAINTENANCE
Depending on the level of water cleanliness, the following should be done every 100 operating hours:
- Clean the pre-filter basket regularly to avoid drops in pressure. To prevent the basket from breaking, do not
hit it during the cleaning process.
- Should the pump stop, check that the consumption in amperes of the motor that is running is equal to or
below that indicated on the manufacturer's rating plate. If this information is not available, contact the
nearest Technical Assistance Service.
- Empty the pump if it is to remain at a standstill for a certain length of time, especially in cold countries
where there is a risk of freezing.
- Remove the purge cap to empty the pump.
- Every time the pre-filter is opened, clean the seal and its housing of any impurities to ensure airtightness
when the cap is closed (Fig. 5).
- Pump components that, due to their normal use, suffer wear and/or tear must be regularly replaced to
ensure good pump performance. The following table lists the fungible and / or consumable components of
the pump and the period of time in which they must have been replaced.
DESCRIPTION OF THE COMPONENT
Bearings
Mechanical seal
O-rings and other sealing components
Control unit battery
The opening and closing of the pump for the replacement of any of the inner spare parts does not guarantee the
(1)
subsequent sealing. For this reason, it is recommended that the O-rings and sealing components are replaced
whenever the mechanical seal and / or bearings are changed.
The estimated working life of the above parts has been established according to normal product use and installation
conditions.
Follow the instructions in the installation manual to maintain the working life of the pump.
6. REMOVAL
- The motor unit can be removed from the pump body without having to disconnect the pump's suction and
return pipes.
- To remove the motor unit from the pump body, remove the screws that join them together.
10
TIME BETWEEN REPLACEMENTS
(1)
Installation and general maintenance manual
10,000 h
10,000 h
10,000 h
2 years
- POOL PUMPS
Tabla de contenido
loading

Tabla de contenido