Reverse Door - De Dietrich DRL1624J Manual De Instrucciones

Reverse Door

Tools required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Important! Reversing the door is a 2-people job
Ensure the unit is unplugged and empty.

To take the door off, it is necessary to tilt the unit backwards. Avoid laying it flat as this may damage the cooling system . Rest

the unit on something solid so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.

Unscrew the top hinge. Then lift the door and place it on a padded
1.
surface to avoid scratching.
Remove bottom hinge pin from right to left.
2.
Unscrew top hinge pin from the hinge. Then turn the hinge over and screw hinge pin.
3.
Re-fit the door and then upper hinge on left side. Ensure the door is
4.
aligned horizontally and vertically, so that the seals are closed on all sides
before finally tightening the upper hinge. If necessary, use a spanner to
tighten the hinge.
9