De Dietrich DRL1624J Manual De Instrucciones página 23

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
your appliance:
• Install it in a suitable location (see
"Installing your appliance").
• Keep doors open for as short time as
possible.
• Do not put hot food in your
refrigerator or freezer, particularly if they
are soups or preparations which emit a
large amount of steam.
• Ensure the optimal functioning of your
device by not letting accumulate too
much frost in the freezer (defrost it
when the ice thickness exceeds 5-6 mm)
and periodically cleaning the condenser
(see "Maintenance your device ").
• Regularly check the door seals and
make sure that they always close
effectively. If this is not the case, please
contact service after sales service.
• Do not let it set at too low a
temperature.
• Not fulfilling with drawers, bins and
shelves arrangement could lead to
increased energy consumption.
WARNING:
If the unit was shipped to home in a
horizontal position, place it vertically and
wait two hours before plugging it in. A
small amount of oil may have flowed
into the refrigeration circuit, you need to
give it time to flow back towards the
motor before connecting the appliance,
otherwise you may damage it.
Before any maintenance, disconnect the
power plug. Do not pull the power cable
but directly enter the profile.
CLEANING AND MAINTENANCE
 Before cleaning, unplug the appliance
and turn off the power.
 Do not clean the appliance with
metal objects, a steam system, volatile
oils, organic solvents or abrasives.
 Do not use sharp objects to remove
ice. Use a plastic scraper.
 To replace the light bulb, if operation
is possible by the user himself, please
refer to the "Maintenance" of this
manual. Always be sure to unplug your
appliance before.
WARNING: If the appliance is equipped
with a LED lighting, it can only be
replaced by a qualified technician
7
.
Tabla de contenido
loading

Tabla de contenido