Blackstone 1813 El Manual Del Propietario página 7

Model 1813 | Owner's Manual | Assembly Guide
!
WA R N I N G
The manufacturer has made
every effort to eliminate any
sharp edges. However, you ASSEMBLY INSTRUCTIONS
should handle all compo-
Please read all instructions thoroughly before proceeding. Make sure all
nents with care to avoid
the plastic packing material is removed before assembling
accidental injury.
Find a large, clean area to assemble your griddle. Please refer to the parts list
Some parts may contain
and assembly diagrams as necessary.
sharp edges, especially
as noted in these instruc-
Griddle assembly involves large components; therefore, it is advised to
tions. Wear protective
have two people assemble the unit.
gloves if necessary.
!
WA R N I N G
The use of alcohol, prescrip-
S T E P 0 1
tion or non-prescription
drugs may impair the
griddle feet and the four (4) M8 flange nuts to the bottom of the griddle in
consumer's ability to prop-
the pre-threaded holes. Ensure that the fuel nozzle is housed within the
erly assemble or safely
burner opening.
operate the appliance.
!
C A U T I O N
Two people are recom-
mended for the assembly
of this product.
08
Place griddle on a smooth flat surface and attach the four (4)
S T E P 0 2
Turn the griddle over so it stands on its legs. Check the ignition
needle. The needle needs to be placed 3-7mm above the burner tube.
S T E P 0 3
Place the griddle top onto the griddle body by aligning the four
pins to the holes of the body. Make sure the front pins are fully seated in the
holes, then push the griddle top back to lock the griddle in place.
Assembly Guide | Owner's Manual | Model 1813
3-7mm
Make sure the front pins are fully
seated in the holes, then push the
griddle top back to lock the griddle
in place.
09