Machine-Specific Safety Warnings; Functional Description - stayer DM1450 Manual De Instrucciones

This manual is consistent with the date of manufac-
ture of your machine, you will find information on
the technical data of the machine acquired manual
check for updates of our machines on the website:
www.grupostayer.com
Machine-specific
Safety Warnings
- Do not use the power tool for explosive materials
(e. g, easily inflammable solvents). Power tools pro-
duce sparks which could ignite developing vapours.
- In case the power tool should fall into the material
to be stirred, pull the plug immediately and have
the power tool checked by an after-sales service
agent. Material that has penetrated the power tool
can cause damage and lead to an electric shock.
- Always use the auxiliary handle supplied with the
machine. Loss of control can cause personal injury.
- When working with the machine, always hold it fir-
mly with both hands and provide for a secure stan-
ce. The power tool is guided more secure with both
hands.
- Do not work materials containing asbestos. Asbes-
tos is considered carcinogenic.
- Take protective measures when dust can develop
during working that is harmful to one's health,
combustible or explosive. Example: Some dusts
are regarded as carcinogenic. Wear a dust mask and
work with dust/chip extraction when connectable.
- Always wait until the machine has come to a com-
plete stop before placing it down. The tool insert
can jam and lead to loss of control over the power tool.
- Never use the machine with a damaged cable. Do
not touch the damaged cable and pull the mains
plug when the cable is damaged while working.
Damaged cables increase the risk of an electric shock.
- Connect machines that are used in the open via a
residual current device (RC D).

Functional Description

Read all safety warnings and all instruc-
tions. Failure to follow the warnings and ins-
tructions may result in electric shock, fire and/or
serious injury.
While reading the operating instructions, unfold the gra-
phics page for the machine and leave it open.
Utilización reglamentaria
La herramienta eléctrica ha sido diseñada para remover
materiales de construcción en polvo como morteros,
revoques, adhesivos y pinturas, lacas o demás sustancias similares que también estén exentas de disolvente.
ENGLISH
9
Datos técnicos
Stirrer/Mixer
Power input
No load speed (top)
No load speed (lower)
Mixing whisk top
Mixing whisk lower
Spindle thread
Tightening torque
Weight
Power input
No load speed
Mixing whisk
Spindle thread
Tightening torque
Weight
Power input
No load speed
Mixing whisk
Spindle thread
Tightening torque
Weight
Power input
No load speed
Mixing whisk x2
Spindle thread
Tightening torque
Weight
Power input
No load speed
Mixing whisk x2
Spindle thread
Tightening torque
Weight
The values given are valid for nominal voltages [U] of 230/240 V ~ 50/60
Hz - 110/120 V ~ 60 Hz. For lower voltage and models for specific coun-
tries, these values can vary.
9
DM1450
1400 W
290-480
380-620
Ø 120mm
Ø 95mm
M18
30Nm
5kg
90L
M1100B / M1100BK
1200 W
100-400 / 150-700 min
-1
Ø 120 mm
M14
20.5 Nm
4.7 kg
75 L
M1200C / M1200CK
1200 W
200-400 / 350-700 min
-1
Ø 120 mm
M14
20.5 Nm
4.8 kg
75 L
M1500 / M1500K
1500 W
180-380 / 300-650 min
-1
Ø 160mm y 140 mm
M14
36 / 17 Nm
6 kg
90 L
M1600
1600 W
150-300 / 300-650 min
-1
Ø 160mm y 140 mm
M14
37 / 18.5 Nm
6 kg
90 L