NEC AccuSync LCD193WXM Manual Del Usuario página 8

Quick Start
Removing the Base
Note: Always remove the Base when
shipping the LCD.
. Place monitor face down on a
non-abrasive surface.
2. Using your fingers, press the
release tab to unlock the stand.
3. Pull the unlocked base off the stand.
Connecting a Flexible Arm
This LCD monitor is designed for use with a flexible arm. Please use the screws
(4pcs) as shown in the picture when installing.
To meet the safety requirements, the monitor must be mounted to an arm which
guaranties the necessary stability under consideration of the weight of the monitor.
The LCD monitor should only be used with an approved arm (e.g. GS mark).
2mm
4 x 2mm with lock washer
and flat washer
4 SCREWS (M4)
(MAX depth: 0.0 mm)
If using other screws,
check depth of holes.
- continued
M4
00 mm
Thickness of Bracket
(Arm) 2.0~3.2 mm
00 mm
6
Release Tab
Tighten all
screws.
Weight of LCD assembly:
LCD93WXM : 4.3 kg (MAX)
LCD203WXM : 4.9 kg (MAX)
LCD223WXM : 5.3 kg (MAX)