Tabla de contenido
USB 3.0 Gigabit Ethernet Adapter
• Connect the USB 3.0 connector of the adapter to a free USB 3.0 port
of computer. Then a pop-up message will appear in the notification
area indicating the installation is completed. If necessary, restart
your notebook / PC.
VERIFYING THE DRIVER
To verify the driver of the adapter, follow the steps below to open the
Device Manager on Windows®
• Windows® 10: Start / Device Manager
• Windows® 7 / Windows® 8 / Windows® 8.1: Control Panel / System
and Security / System / Device Manager
• In the Network adapters group, an item named „Realtek USB GBE
Family Controller".
To verify the driver of the adapter, follow the steps below to open the
Device Manager on Mac®
• Please connect the adapter to MacBook / PC.
• Click the System Preferences Network USB Gigabit Ethernet
device / "USB 10/100/1000 LAN" active on line.
Note: If there is a question or exclamation mark next to Ethernet adapter
in Windows®, then the driver is not properly installed. Please delete
the item, unplug the adapter and repeat the installation steps. We also
recommend restarting your notebook / PC.
PACKAGE CONTENTS
• i-tec USB 3.0 Gigabit Ethernet Adapter with integrated cable (28
cm)
• Quick Installation Guide
SAFETY INSTRUCTIONS
• Do not expose to extreme temperatures and air humidity
• Use the device on flat surfaces – you will prevent it from slipping
and falling to the ground.
• Save the user manual for a possible use later.
In cooperation with the service department:
• Check functionality after falling to water or to the ground.
• Check functionality when the cover is broken.
• Send the device back if it does not work in accordance with the
user manual.
FREQUENTLY ASKED QUESTIONS
Available on our website www.i-tec.cz/en/ on the "FAQ" tab of this
product.
8 |
ENGLISH
ENGLISH
Tabla de contenido
