Stopping The Machine; Looking After Your Machine And Dealing With Faults; Cleaning The Machine - Brandt TI2FSOFT Manual De Instrucciones

+/- keys. To stop the timer press the Timer key (3) for several seconds. The timer light will go
out.

Locking Function
To lock all the control keys during cooking press the locking key (10). The "Lo" indicator will
appear on the screen.
In this situation only the Start/Stop key (7) can be used to turn off the machine. If you press
the Start/Stop key (7) in locking mode the screen will display "L" or "H" meaning that your
machine is turned off. To unlock the controls press the Start/Stop key (7) again and then press
the locking key for 3 seconds.
d) Stopping the Machine
After use the electric plate will be hot, the audible alarm sounds and the "H" indicator flashes
on the screen. To turn off the machine press the Start/Stop key (7) and then unplug it.
For information, you can refer to the following table to find the heating level relating to each
number on your control panel.
Levels 1
Power in Watts
Left-hand 120
plate
Power in Watts
Right-hand 120
plate

4) LOOKING AFTER YOUR MACHINE AND DEALING WITH FAULTS

a)

Cleaning the Machine

Ensure the machine is off and unplugged before cleaning.
Carry out cleaning when the ceramic plate has cooled down.
About the vitroceramic plate and the control panel
 Lightly soiled: clean with a soft, damp cloth
 Soiled with fat: clean with a soft, damp cloth with a little toothpaste or neutral detergent
until the residues are removed.
 Do not use an abrasive, flammable, acid or alkaline cleaning liquid
Note: When cleaning never clean the surface of the hob with a stiff brush.
2 3 4
300 500 800
200 400 500
5 6
1000 1200 1400
700 900 1000
25
7 8 9
1600 1800
1100 1300
10
2000
1400