Installing The Unit - KAPSCH B’MOOV - 5310 Guía De Usuario

CHAPTER 2
STEP 1 – FIX THE UNIT TO THE HOLDER
A
1/ Clip the unit (A) to the holder (B) and
make sure the unit and its bracket are
oriented as shown on the diagram above.
STEP 2 – POSITION THE UNIT ON THE WINDSCREEN
View from the exterior of the vehicle
The unit must be located centrally on a clean windscreen surface at steering wheel
height, its screen facing the driver, just above the windscreen wipers when they are at rest
and outside any tinted area of the windscreen. The screen and LEDs must be visible by
the driver seated behind the wheel without impairing the driving.
10 cm of empty space must be left free around and in front of the unit.
The driver must remove any object that could compromise the correct operation
of the unit.

INSTALLING THE UNIT

B
Top
B
30
2/ Unpeel the adhesive protective strip.
Single-use
adhesive label
You have only one
attempt to fix the
bracket (part B)
Single-use
adhesive
label