Skymsen ABSC Manual De Instrucciones página 10

-Place the protective cover No. 02 (Pic. 06) with the rollers on a table.
- Lift the front Rollers of Support No. 01 (Pic. 06) until the rolls of support lock disengage
the existing plug-in protection cover No. 02 (Pic. 06), and pull it forward until it is totally
out of the protective cap No. 02 (Pic. 06) as shown in Pic. 06.
02
- Remove the rollers picking at their ends as indicated by the arrows and pull them up as
Fig 08.
- Remove the two rollers so that the support rollers is completely empty, as shown in Fig 07
and Fig 08.
10
PICTURE 06
01
COMBS
SUPPORT
LOCKER
FITTING
COMBS
SUPPORT