Replacing The Oven Light; Cleaning The Grease Filter; Replacing The Charcoal Filter - Samsung ME21F606MJT Manual De Usuario

REPLACING THE OVEN LIGHT

When replacing the oven light, make sure that you are
wearing gloves to avoid injury from the heat of the bulb.
1. Unplug the oven or turn off the power at the main
power supply.
2. Open the door.
3. Remove the vent cover mounting screws (2 middle
screws).
4. Slide the vent grille to the left, then pull it straight out.
5. Remove the charcoal filter, if present.
6. Remove the cover by pushing the hook and pulling up
the lever.
7. Remove the bulb by turning it gently.
8. Replace the bulb with a 40 watt appliance bulb.
9. Replace the bulb holder.
10. Replace the vent grille and the 2 screws.
11. Turn the power back on.

CLEANING THE GREASE FILTER

Your microwave oven has two metal reusable grease
filters. The grease filters should be removed and cleaned
at least once a month, or as required.
To avoid risk of personal injury or property damage,
do not operate the oven hood without the filters in
WARNING
place.
1. To remove the filter, slide it to the left (or right) using
the tab.
2. Soak the grease filter in hot water and a mild
detergent. Rinse well and shake to dry. Brushing the
filter lightly can remove embedded dirt.
Do not use ammonia or put the grease filter in the
microwave oven. The aluminum will darken.
WARNING
22_ cleaning and maintaining your microwave oven
ME21F606MJT_AA_EN.indd 22
3. To return the filter to its position, slide it into the frame
slot on the left (or right), then push it upwards and to
the right (or left) to lock it.

REPLACING THE CHARCOAL FILTER

If your oven is vented to the inside, the charcoal filter
should be replaced every 6 to 12 months and more often
if necessary. The charcoal filter cannot be cleaned. To
order a new charcoal filter, contact the Parts Department
at 1-800-627-4368 or your Samsung dealer. You can also
order online at www.samsungparts.com
1. Unplug the oven or turn off the power at the main
power supply.
2. Open the door.
3. Remove the vent grille mounting screws (2 middle
screws).
4. Slide the vent grille to the left, then pull it straight out.
5. Push the hook and remove the old filter.
The filter angle
The angle
6. Slide a new charcoal filter into place. The filter should
rest at the angle shown.
7. Replace the vent grille and 2 screws and close the
door. Turn the power back on and set the clock.
The filter angle
6/25/2013 10:02:11 AM