EdenPURE Signature Manual De Funcionamiento Y Garantía página 6

SAVE THESE INSTRUCTIONS
10) Timer: the heater is equipped with a timer feature that will either shut the unit off
after a desired amount of time or delay the time for the unit to turn on.
Automatically turn off: With the unit running at the desired temperature, press the timer
button, 00 will illuminate in red led numbers, then push the temp up or temp down
arrow to select the desired number of hours you would like the heater to run before
shutting off. The hours range from (1-24) in 1 hour increments. Once the number of
hours is set, the unit will automatically shut off once the set amount of time has
passed.
Automatically turn on: With the power button off, push the timer button, 00 will
illuminate in red led numbers, then push the temp up or temp down arrow to select
the desired number of hours (1-24) you would like to delay the start of your heater.
The heater will come on at the last heat setting used once the set amount of time has
passed.
11) Ion: Press the Ion button to turn on the negative ion generator. Press it again to turn
off the generator.
12) This heater is equipped with a safety "tip over" feature. If the unit is tipped, even
slightly while operating the power will shut off to the unit. Once the unit is returned
to its upright position you will need to push the power button to restart your unit and
it will return to the last settings used
Cabinet Care – Wipe clean with a soft damp cloth.
Heater Storage – When the heater is not going to be used for an extended period of
time, please do the following:
1) Unplug Heater.
2) Drain the water receptacle for the Humidifier feature and allow to completely
air dry
3) Wind up electrical cord so as to keep it off the ground.
4) Cover the heater to prevent dust from accumulating on the filter or
internally.
5) Store the heater in a dry, low dust environment.
Service – To replace a heating element or for other repairs or service, please
call us toll-free at 1-800-839-0966.
4