Tabla de contenido
Idiomas disponibles
Idiomas disponibles
HU 2031
6. Place the tank onto the base.
7. Plug the appliance into the power outlet.
8. The mist intensity can be adjusted by turning the Mist Intensity Control knob until the
desired amount of mist is emitted from the nozzle.
9. Ensure that the mist output nozzle is directed away from walls and furniture.
10. When the humidifier runs out of water, the appliance will automatically switch off the
steam production mechanism and indicator light will light in red.
11. The steam production time and emission quantity may vary depending on the water
hardness.
OTHER FEATURES
In cold weather, windows, and even some walls may fog or develop frost from excessive
indoor humidity. If this occurs, reduce the mist intensity setting to avoid damage from
condensed water dripping on windowsills.
Too much humidity in the room may allow moisture to accumulate on surfaces where bacteria
and fungi can grow. Collected moisture may also harm furniture, and walls, especially
wallpaper.
To eliminate too much humidity, especially in a small room, leave the room door open, add adjust the mist
intensity control setting.
CARE AND MAINTENANCE
1. Switch the appliance off and unplug it.
2. Wipe the body of the appliance off with a soft damp cloth. If necessary use a little washing-up liquid.
3. Rinse the water tank with clean water after each use. To dry for storage, wipe with a soft clean cloth.
4. Do not use detergents to clean any part of the unit that normally contains water. Detergents can
interfere with the performance of the unit.
5. Do not immerse the humidifier in water or any other liquid.
6. Do not use harsh or abrasive cleaning agents or solvents.
CHECK THE MALFUNCTION AND REPAIR
If your humidifier can't work, please ask the service department to repair:
10
Tabla de contenido
