Cameo OPUS SP5 FC Manual De Usuario página 10

Link Link
UnLink
Receive Reset NO
YES
STAND-ALONE MODES (Stand Alone)
Starting from the main display, press ENTER to go to the main menu. Use the UP and DOWN control keys to select the Control menu and
press ENTER. Using the UP and DOWN buttons, now select the "Stand-Alone" menu option and confirm via ENTER. Now select one of the
three stand-alone modes using the UP and DOWN control keys and confirm via ENTER.
STAND ALONE STATIC MODE (Static)
Static mode makes it possible, as with a DMX control device, to configure PAN, TILT, Dimmer, Strobe, Color Wheel, and Gobo Wheel from
000 to 255 directly on the device. This allows the user to create individual scenes without needing an additional DMX controller. You can
configure the settings as desired after you have selected Static mode, as described under "STANDALONE MODES". The submenu options
here correspond to channels 1 to 54 in the Direct Extended DMX mode (see DMX CONTROL, select submenu options via UP and DOWN,
change value via LEFT and RIGHT, confirm via ENTER). Press MODE again to return to the main screen.
STAND-ALONE AUTO PROGRAM (Auto Prog)
The 4 different Auto programs (Program 1–4) consist of pre-programmed head movements, gobo and color changes, etc.; the speed is con-
figured separately. Select Auto mode, as described previously under "STAND-ALONE MODES", confirm via ENTER, select the desired Auto
program via UP and DOWN, confirm via ENTER, and now change the value for the speed from 000 to 100 via LEFT and RIGHT as desired.
Confirm with ENTER. Press MODE again to return to the main screen.
10
Link with W-DMX devices. W-DMX must be active for all devices and the link with a transmitter
must be suspended (Receive Reset)
Unlink all devices
Do not suspend link with a transmitter
Suspend link with a transmitter