Double Insulation For Safer Operation; Operation And Maintenance - Metabo HPT C 10FCG Manual De Instrucciones

WARNING:
Avoid electrical shock hazard. Never use this tool with a damaged or frayed electrical cord or extension cord.
Inspect all electrical cords regularly. Never use in or near water or in any environment where electric shock is possible.

DOUBLE INSULATION FOR SAFER OPERATION

To ensure safer operation of this power tool, metabo HPT has adopted a double insulation design. "Double insulation" means that two physically separated
insulation systems have been used to insulate the electrically conductive materials connected to the power supply from the outer frame handled by the
operator. Therefore, either the symbol "
Although this system has no external grounding, you must still follow the normal electrical safety precautions given in this Instruction Manual, including not
using the power tool in wet environments.
To keep the double insulation system eff ective, follow these precautions:
∗ Only metabo HPT AUTHORIZED SERVICE CENTER should disassemble or assemble this power tool, and only genuine metabo HPT replacement parts
should be installed.
∗ Clean the exterior of the power tool only with a soft cloth moistened with soapy water and dry thoroughly.
∗ Never use solvents, gasoline or thinners on plastic components; otherwise the plastic may dissolve.
NOTE:
The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance of the power tool.
Some illustrations in this Instruction Manual may show details or attachments that diff er from those on your own power tool.
NAME OF PARTS
MODEL C10FCG C10FCG(S)
•
Vise assembly
" or the words and "Double insulation" appear on the power tool or on the nameplate.
SAVE THESE INSTRUCTIONS
AND
MAKE THEM AVAILABLE TO OTHER USERS
AND
OWNERS OF THIS TOOL!

OPERATION AND MAINTENANCE

Motor head
Gear case
Dust bag
Fence
(Left side)
Sub fence
Turn table
Handle
Lock-off button
Motor
Saw blade
Lower guard
Rotation
direction
Indicator (B)
(For bevel scale)
Fence
(Right side)
Table insert
Indicator (A)
(For miter scale)
Lever
Side handle
Fig. 1
English
5