Phasak PH 9280 Manual De Uso página 55

Step 7. Communication connection.
Communication port:
To allow for unattended UPS shutdown/start-up and status monitoring, connect the communication cable one end to the USB/RS-
232 port and the other to the communication port of your PC. With the monitoring software installed, you can schedule UPS
shutdown/start-up and monitor UPS status through PC.
The UPS is equipped with intelligent slot perfect for either SNMP or AS400 card. When installing either SNMP or AS400 card in
the UPS, it will provide advanced communication and monitoring options. Note. USB port and RS-232 port can't work at the same
time.
Step 8. Network connection. (varies depending on the model)
Network/Fax/Phone surge ports:
Step 9. Turn on the UPS.
Press the ON/Mute button on the front panel for two seconds to power on the UPS.
Note: The battery charges fully during the first five hours of normal operation. Do not expect full battery run capability
during this initial charge period.
Step 10. Install software.
For optimal computer system protection, install UPS monitoring software to fully configure UPS shutdown. You may insert
provided CD into CD-ROM to install the monitoring software. If not, please follow steps below to download and install monitoring
software from the internet:
1. Go to the website http://www.phasak.com/descargas
2. Click ViewPower software icon and then choose your required OS to download the software.
3. Follow the on-screen instructions to install the software.
4. When your computer restarts, the monitoring software will appear as an orange plug icon located in the system tray,
near the clock.
Step 11. External battery connection.
Follow below chart to make external battery connection:
Segurança e harmonia
ININTERRUPTA
(varies depending on the model)
USB Port RS-232 Port
IN
2. Installation and setup
Intelligent Slot
OUT
Uninterruptable Power Supply
EN
54
PH 9280 | PH 9290