Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6
4. After the access point setting is finished, perform the connection test
5. Go to the next step
(Press twice)
[WPS(Push button)]
1. Press the WPS button on the access point until the light flashes
2. Connect the TV with the access point
WPS(Push button)
1) Please press the 'WPS' button on the wireless
access point until its light flashes.
2) When the light is flashing select 'Connect' on
TV.
If you are unsure, please check the instruction
manual of the wireless access point.
3. After the access point setting is finished, perform the connection test
4. Go to the next step
(Press twice)
Select [Home]
7
Select [Home] viewing environment to use in your home environment.
Please select your viewing environment.
Home
■
[Shop] viewing environment (for shop display only)
[Shop] viewing environment is the demonstration mode to explain main features of this TV.
Select [Home] viewing environment to use in your home environment.
●
You can return to viewing environment selection screen at the stage of Shop confirmation screen.
1
Return to viewing environment selection
screen
Shop
You have selected shop mode
To change viewing environment later on, you will need to initialise all settings by accessing Shipping Condition.
[Shipping Condition] (p. 39)
Auto Tuning is now complete and your TV is ready for viewing
If tuning has failed, check the connection of the RF cable, and then, follow the on-screen instructions.
Note
●
To check the channel list
●
To edit or hide (skip) channels
●
To retune all channels
●
To initialise all settings
16
Connection Test
Check wireless network connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
●
Ensure that your access point supports WPS for this setup.
●
WPS: Wi-Fi Protected Setup™
●
If the connection has failed, check the settings and positions of your access
point. And then, follow the on-screen instructions.
Connect
Connection Test
Check wireless network connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
Shop
"Using TV Guide (Digital TV)" (p. 22)
"Tuning and Editing Channels" (p. 34 - 37)
[Auto Tuning] in "Tuning and Editing Channels" (p. 36, 37)
[Shipping Condition] (p. 39)
: succeeded
The test is successful and the TV is connected to the network.
: failed
Check the settings and connections. And then select [Retry].
●
To set manually, select [Manual] and set each item.
For details
(p. 56)
: succeeded
The test is successful and the TV is connected to the network.
: failed
Check the settings and connections. And then select [Retry].
select
set
2
Select [Home]
Please select your viewing environment.
Home
Shop
select
set
Capítulos
Tabla de contenido
