Basic Operation - Edenwood ED43E00UHD-MM Instrucciones De Uso

MAKE SURE ALL THE EQUIPMENTS AND POWER PLUG ARE CONNECTED PROPERLY AND THE
UNIT IS SET IN CORRECT MODE BEFORE KINDS OF OPERATIONS.
- Press POWER button on the unit or remote control to power ON the unit ; press it again to power OFF
(standby mode) the unit (indicator will glow red).
- Press SOURCE button on the remote control to switch the unit to Composite or HDMI mode.
SELECT DESIRED PROGRAM
1. Press CH+ button to play next channel.
2. Press CH- button to play previous channel.
3. Press number buttons on remote control directly to select desired program
VOLUME CONTROL
- Press VOL+ or VOL- to adjust the level of current volume. Available range: 0-100
MUTE CONTROL
- Press MUTE button to mute the sound, press it again to turn on the sound.
SOURCE SETTING
- Press SOURCE button on the remote control to display the sources list.
- Press UP or DOWN navigation button to select desired input source, and then press OK button to confirm
selection.
Available options: TV,Composite, HDMI.

BASIC OPERATION

BASIC OPERATION B
EN 13