Using The Machine - Stiga Villa Instrucciones De Uso

Ocultar thumbs Ver también para Villa:

Instrucciones de uso (126 páginas)

Contenido

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

página de 114

/ 114
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

All manuals and user guides at all-guides.com

Depress the freewheel clutch pedal fully.

Move the parking brake to the right and

then release the pedal.

The parking brake is released by pressing the free-

wheel clutch pedal lightly. The spring-loaded

brake lever then moves automatically to the side.

5. POWER TAKE - OFF (IN)

A lever for engaging the power take-off for driving

front-mounted accessories. There are two posi-

tions:

1. Lever in lower position - power take-off

disengaged.

2. Lever in upper position - power take-off

engaged. The lever is locked in this posi-

tion if a person weighing more than 30 kg

is sitting on the seat.

6. POWER TAKE - OFF (OUT)

A spring-loaded lever for disengaging the power

take-off.

Press the button to disengage the power

take-off.

7. SEAT SUSPENSION

Rotary control for variable adjustment of the seat

suspension. Adjust to weight of driver.

1. Turning counter-clockwise -

suspension will become softer.

2. Turning clockwise - suspen-

sion will become harder.

If the suspension is tightened too hard it could

mean that the lever for engaging the power take-

off (5) cannot be locked in its upper position.

NOTE! To prevent a deterioration in mobility,

do not over tighten the screw joints in the seat

suspension.

8. GEAR LEVER

A lever for selecting one of the five forward gears

in the gearbox (1-2-3-4-5), neutral (N), or reverse

(R).

When changing from neutral to forward or re-verse

the gear lever must be lifted upwards.

The pedal must be kept depressed when changing

gear.

NOTE! You must make sure the machine is quite

ENGLISH

stationary before changing from reverse to forward

gear or vice versa. If a gear does not engage imme-

diately, release the pedal and depress it again, and

then engage the gear once again. Never force a

gear in.

11. THROTTLE/CHOKE CONTROL

A control for setting the engine speed and to choke

the engine when starting from cold.

1. Idle.

2. Full throttle - when the machine is in

operation, full throttle should always be

used. Full throttle positioned 1 - 1.5 cm

from the lower edge of the groove.

3. Choke - for starting a cold engine.

Choke positioned at the bottom of the

groove.

12. STARTER KEY

An ignition key used for starting and stopping the

engine. There are three positions:

1. Stop position - engine short circuited.

STOP

The key can be be removed.

2. Drive position (without symbol).

3. Start position - the electric starter motor

START

is activated when the key is tur-ned to the

spring-loaded start position. Once the en-

gine has started, allow the key to return to

the drive position.