Checking For Leaks - SUNVILLA 1476140 Instrucciones De Ensamblado, Uso Y Cuidado

Note:
Illustrations reflect typical installations
and are FOR DESIGN PURPOSES ONLY.
Illustrations / diagrams are not drawn to
scale.
Actual installation may vary due to
individual design preference.
WARNING
Fire Risk
provide adequate clearance
Around air openings.
For service access.
Locate appliance away from traffic ares.
65
48
Figure1. Clearance to Combustibles.
36

Checking for leaks

1.Make 2-3oz of leak detection solution by mixing one part liquid
dishwashing soap with three parts water.
2.Make sure control knobs are in the " o " position(Figure 1)
3.Connect LP gas tank ;
4.Turn LP gas tank valve to "open";
5.Spoon several drops of solution or use a squirt bottle,at all "X"
locations;
a.If any bubbles appear, turn LP gas tank valve to "CLOSED",
reconnect and re-rest;
b.If you continue to see bubbles after several attempts turn LP gas
tank valve to "CLOSED" and disconnect LP gas tank ,per
"Disconnecting LP Gas Tank Contact 888-690-9800 for
assistance.
c.If no bubbles appear after one minute, turn LPgas tank valve to
"CLOSED",wipe away solution proceed.
12/14
Made in China