Maintenance And Repairs - Costway 52104738 Manual Del Usuario

Setup/Inflation
• Unroll product evenly across smooth, flat, debris-free surface. Connect blow-
er(s) to inlet, and tie. Anchor the inflatable product and the blower(s) to the
ground using stakes, cabling, and/or sand bags.
• Plug in and start blower (If your item uses multiple blowers, turn them on one at
a time).
• Once inflated, confirm the inflatable is properly secured to the ground.
• Blower(s) must remain powered on and connected to bounce house at all times
while in use.
Deflation/Storage
• Ensure that all the players have left play area.
• Remove any loose articles or debris from play area.
• Turn off, and unplug blower(s).
• Once the product is fully deflated, fold and store in cool, dry area.

Maintenance and Repairs

• Always keep products clean to protect the seams and surface.
• Regularly inspect seams and play surface for any necessary repair. Slight
damage caused by natural or man-made factors can be repaired with the repair
kit provided.
• To repair, deflate the product thoroughly, and ensure the surface is dry. Cut
patches to sizes suitable for repair. Apply glue on both the repair patch and the
damaged surface. Allow the glue to air-dry for 30 seconds before adhering the
patch to the play surface. Then, allow adhesion to dry for at least 4 hours before
use.
04 05