Dell PowerEdge 6600 Manual Del Usuario página 6

4N560ebk1.book Page 4 Monday, November 25, 2002 12:03 PM
F i g u r e 1 - 2 .
15
16
17
18
1-4
Mircroprocessor Upgrade Installation Guide
All manuals and user guides at all-guides.com
R e m o v i n g a n d R e p l a c i n g t h e M i c r o p r o c e s s o r
microprocessor socket
NOTICE: Be careful not to bend any of the pins when removing the microprocessor. Bending
the pins can permanently damage the microprocessor.
Lift the microprocessor out of the socket and leave the release lever up so that the
socket is ready for the new microprocessor (see Figure 1-2).
Unpack the new microprocessor.
If any of the pins on the microprocessor appear bent, see "Getting Help" in the
Installation and Troubleshooting Guide for instructions on obtaining technical
assistance.
If the release lever on the microprocessor socket is not all the way up, move it to that
position now.
Align the gold triangle on the microprocessor (see Figure 1-2) with the triangle on the
microprocessor socket.
NOTE: Zero insertion force is needed to install the microprocessor. If the microprocessor is
aligned correctly, it should drop into the microprocessor socket.
microprocessor
pin-1 corners
release lever