Ec
x4
Gc
x4
Fc
x4
Fc
Ec
Fig. 5
B
x14
)
5
Attach the Bottom Shelf Assembly (Tc) to the Legs (Sc) with one
Washer (Fc) and Hex Nut (Gc) through the single predrilled hole in each leg. See Figure 5.
Using the predrilled holes, attach a Bottom Shelf Side Apron (U
shelf assembly with four 4x40mm Phillips Screws (B).
Set the hutch over the back edge of the center shelf assembly.
in each end of the center shelf assembly and two in the back ed
holes in the bottom of the hutch sides and two in the hutch apr
Screws in the blind holes until they begin to come through the
hutch sides and apron over the screws and complete inserting th
All manuals and user guides at all-guides.com
Fc
Tc
Gc
Ec
Fc
Gc
Ec
Uc
Fc
Ec
Ec
Ec
Fig. 5a
8x60mm Hex Bolt (Ec),
c) to each end of the
There are two blind holes
ge. There are also two
on. Start 4x40mm Phillips
top. Align the holes in the
e screws. See Figure 5a.
963KFSIc – Page 5 – 10/08
Hc
Uc
bottom
