1. Manuales
  2. Marcas
  3. Garden Wood Furniture Manuales
  4. Muebles de Interior
  5. SIENNA FINISH 963KFSIc
  6. Instrucciones de montaje

Garden Wood Furniture SIENNA FINISH 963KFSIc Instrucciones De Montaje

Ocultar thumbs Ver también para SIENNA FINISH 963KFSIc:
Tabla de contenido

Enlaces rápidos

Model #
963KFSIc
SIENNA FINISH
Potting Bench
Assembly I nstructions
Your piece of GardenWood furniture has been finished
at the factory with a tinted, penetrating oil that contains
both UV and anti-fungal inhibitors. For best results, es-
pecially in extreme climates, another coat of protective oil
is recommended before using for the first time. A surface
coating is vital for the protection of your furniture. Treat-
ment should be applied at least once or twice a yea r.
For normal household use only.
recommended for commercial use.
Do not climb, sit, or stand on this piece of
furniture.
Unload items from this unit prior to moving.
Do not overload shelves on this unit.
Presented by Whittier Wood Products
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts w hich are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products c ustomer s ervice
department directly (by phone, f ax, mail or
email) for replacement parts.
Hours:
O ur f riendly c ustomer s ervice staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific T ime). A mess age can be
left 24 hours a day, 7 days a week.
To Order:
Provide t he complete f urniture
model number (upper left corner of t his
page), part letter/number, production code,
quantity needed, reason for replacement
and your f ull name and address along w ith
a telephone number in case we need to
contact you.
Parts s hip from our Eugene, Oregon factory
within 1 or 2 business days from the time
we r eceive the re quest. Please all ow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • www.whittierwood.com
Mail: P.O. Box 28 27 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and
Maintaining the Beauty of Garden Wood Furniture
completely before beginning.
Inspect your furniture pe riodically for any loose
glue joi nts or s crews, or any other problem w hich
may be affecting t he stability of your furniture.
Tighten or rep air as needed.
Production Code:
VN
We w ill replace any
Rev. 10/08
Tabla de contenido
loading

Manuales relacionados para Garden Wood Furniture SIENNA FINISH 963KFSIc

Resumen de contenidos para Garden Wood Furniture SIENNA FINISH 963KFSIc

  • Página 1 Treat- ment should be applied at least once or twice a yea r. Read both the Assembly Instructions and Maintaining the Beauty of Garden Wood Furniture For normal household use only. completely before beginning.
  • Página 2 963KFSIc Potting Bench – Parts List Please identify the parts and check that quantities received match those on this list. If you need to replace a part, refer to the following letter and name. Jc Hutch Left Side ... . 1 Kc Hutch Right Side .

  • Página 3: Tools Required

    963KFSIc Potting Bench ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: 4mm Hex Wrench (provided), Phillips Screwdriver, Adjustable Wrench, Padded Hammer or Rubber Mallet, Outdoor Wood Glue Fig. 1a Fig. 1 1) Glue four Wood Dowels (D) into the Hutch Right Side (Kc): one in the highest hole along the back edge, one in the third hole down, one in the second hole from the bottom, and one in the middle hole in the row across the cente r.
  • Página 4 Fig. 3 Shown with tub opening on the left side. 3) Decide whether you want the tub to be on the left or right side. With the Center Shelf Assembly (Rc) lying face down, place the apron assembly so that the tub opening is on the desired side. Fasten in place with six 4x30mm Phillips Screws (C) through the pocket drilled holes in the aprons.
  • Página 5 Fig. 5 Fig. 5a 8x60mm Hex Bolt (Ec), Attach the Bottom Shelf Assembly (Tc) to the Legs (Sc) with one Washer (Fc) and Hex Nut (Gc) through the single predrilled hole in each leg. See Figure 5. c) to each end of the Using the predrilled holes, attach a Bottom Shelf Side Apron (U bottom shelf assembly with four 4x40mm Phillips Screws (B).
  • Página 6 Fig. 6 Fig. 7 6) Attach the Tub Side Supports (Vc) to the Tub Supports Front/Back (Wc) by gluing two Dowels (D) into the predrilled holes in the Front/Back Supports and in the ends of the side supports. The notches in the Side Supports (Vc) must face up. The two notches in theTub Supports Front/Back (Wc) must face down.
  • Página 7 Identifique las piezas y compruebe que las cantidades recibidas son iguales a las de esta lista. Si necesita reemplazar una pieza, consulte la letra y el nombre que vienen a continuación. Wc Soporte frontal y Kc L Lc P Ac Tornillo hexagonal 6x50mm .

  • Página 8: 963Kfsic Mesa De Trabajo De Jardinería

    963KFSIc Mesa de Trabajo de Jardinería INSTRUCCIONES PARA ARMAR Herramientas Necesarias: Llave hexagonal (provista), Destornillador Phillips, Llave ajustable, martillo almohadillado o mazo de goma, cola para madera para uso en el exterior APLIQUE COLA A TODOS LOS TAQUETES APLIQUE COLA A TODOS LOS TAQUETES EN ESTE PASO EN ESTE PASO Pegue con cola dos taquetes (D) en los dos orificios del lado...
  • Página 9 Veuillez identifier les pièces et vous assurer que les quantités reçues correspondent à celles de la nomenclature.Si vous devez remplacer une pièce, veuillez vous référer aux lettres et aux noms suivants. Qté Qté Côté gauche de la Support latéral huche ... . 1 du bac .

  • Página 10: 963Kfsic Établi De Jardinage

    963KFSIc Établi de Jardinage INSTRUCTIONS DE MONTAGE OUTILS NÉCESSAIRES : Clé Hexagonale (founir), Tournevis Cruciforme, clé à réglable, marteau rembourré ou maillet en caoutchouc, colle à bois pour extérieur COLLEZ TOUTES LES CHEVILLES Fixez les pieds au tablier avant (Qc) et au tablier arrière 1.

Tabla de contenido