Garden Wood Furniture 987KFSI1 Instrucciones De Montaje

Model #
987KFSI1
SIENNA FINISH
36" Pub Table
Assembly Instructions
Your piece of GardenWood furniture has been finished
at the factory with a tinted, penetrating oil that contains
both UV and anti-fungal inhibitors. For best results, es-
pecially in extreme climates, another coat of protective oil
is recommended before using for the first time. A surface
coating is vital for the protection of your furniture. Treat-
ment should be applied at least once or twice a year.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this piece of
furniture.
Presented by Whittier Wood Products
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter/number, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213 Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: [email protected] Fax: 541-687-2060 • Email: [email protected]
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A. Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and
Maintaining the Beauty of GardenWood Furniture
completely before beginning.
Inspect your furniture periodically for any loose
glue joints or screws, or any other problem which
may be affecting the stability of your furniture.
Tighten or repair as needed
Production Code:
We will replace any
Rev. 10/05