Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
Troubleshooting
Problem
Potential causes
Power is not connected
No picture
The receiver is not turned
on
DVB-T2 cable not con-
„No Signal" message is
nected
displayed on the screen
Incorrect setting
Missing or incorrect con-
nection to the audio cable
No sound from the speaker
Sound muted (MUTE)
Incorrect audio track
Missing or incorrect con-
nection to AV cable
Only sound, no image on
screen
The program is a radio
program
Battery exhausted
The remote is not pointed
The pilot is not responding
at the receiver or is not clo-
se enough to the receiver
The image has stopped
suddenly or the mosaic
The signal is too weak
effect is visible
What to do
Connect the power
Turn on the power
Connect the DVB-T2 cable
Reset settings
Connect the audio cable
correctly
Turn off the MUTE function
Try a different soundtrack
Make sure the cables are
properly connected
Press the TV/RADIO button
to switch to TV mode
Replace the battery
Adjust the position of the
remote control and move
closer to the device
Strengthen the signal
Technical Specifications
Pozycja
Sub item
Input frequency
RF input level
Tuner
Intermediate frequency
Modulation
Decoding
Video
The output format
Video output port
Decoding
Audio
Audio output port
Voltage
Power
Power
Photos
USB 2.0
Sound
Video
StandBy
Power consumption
Parametr
170~230MHz, 470~860MHz
-25~-82dBm
7MHz and 8MHz
QPSK, 16QAM, 64QAM, 256QAM
MPEG4 AVC/H.264 HEVC/H.265
HP@L4 MPEG2 [email protected]
576P, 720P, 1080i, PAL/NTSC
HDMI
MPEG-1 layerI/II,PCM do-
wnmix,IEC958 S/PDIF, Dolby 5.1
channel, Dolby downmix 2 channel,
Dolby Prologic2, DD+ (E-AC-3)
HDMI/SCART OUT
100-240V~50/60Hz
Max 7.5W
JPEG, BMP, PNG
MP3, WMA, AAC, AC3
MPEG1, MPEG2 ,MPEG4, AV1 DIVX
≤ 1W
EN
Tabla de contenido
