Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
2. Press UP/DOWN to select your favorite
programs.
3. Press OK to select your favorite pro-
gram.
2.3 Delete a TV or Radio Program
1. Select a program then press the BLUE
button. A message will appear. Press
OK to remove the program.
2. Repeat the previous step to select more
programs to remove.
2.4 Skip TV or Radio Program
1. Select the program you want to skip
and press the GREEN button. The
skip symbol appears. The program is
marked as skipped.
2. Repeat the previous step to select more
programs.
3. To confirm and exit the menu, press the
EXIT button.
Disable TV or Radio Skip: Press the GREEN
button on the skipped program with the
skip symbol.
2.5 Transferring a TV or radio program
1. Select a program, then press the RED
button. The move symbol appears.
2. Press UP/DOWN to move the program.
3. Press OK to confirm.
4. Repeat the above steps to move more
channels.
2.6 Lock the program
You can lock selected programs for restrict-
ed view. To block a TV or radio program:
1. Select a program then press the YEL-
LOW button. The padlock symbol is
displayed. The program is now marked
as blocked.
2. Repeat the previous step to select more
programs.
3. To confirm and exit the menu, press the
EXIT button.
4. Press the YELLOW button to disable the
blocked program.
5. You will need to enter the default pass-
word "000000" or the last set password
to view the blocked program.
3. EPG (Electronic Program Guide)
EPG is an on-screen TV guide that shows
scheduled programs seven days in ad-
vance for each tuned channel. Press the
EPG button on the remote control to ac-
cess the guide. You can use the UP/DOWN
keys to select your preferred program. If
there is more than one page of informa-
tion, use the BLUE button to go up and the
YELLOW button to go to the next page.
4. Sort
Sort your channels by the following op-
tions:
• [LCN] - Sort the channels in ascending
order.
• [Name] - Sort channels in alphabetical
order.
• [Service identifier] - Sort channels by
station.
5. LCN (Logical Channel Number)
Enable or disable LCN.
6. Video settings
To access the Menu, press MENU, then se-
lect [Image]. The menu provides options
for adjusting the video settings. Press
UP/DOWN to select an option and press
RIGHT/LEFT to adjust the setting. Press
EXIT to exit the menu.
1. Aspect - You must set the display for-
mat to 4:3 PanScan, 4:3 Letter Box, 16:9
Full Screen, or Auto to get the correct
aspect ratio while watching TV.
2. Resolution - If the video is not displayed
properly, change this setting. This set-
ting is intended to correspond to the
most common setting for HDMI:
• [480i] for NTSC TV,
• [480P] for an NTSC system TV,
• [576i] for a PAL TV,
• [576P] for a PAL TV,
• [720P] for TV in NTSC or PAL system,
• [1080i] for an NTSC or PAL TV.
3. TV Format - If the video does not dis-
play properly, you need to change this
setting. This should correspond to the
most common TV setting in your coun-
try:
• [NTSC] for NTSC TV,
• [PAL] for a PAL TV.
7. Channel Search
To access the menu, press MENU and select
[Search Channel]. The menu provides op-
tions to adjust the channel search settings.
Select an option and press LEFT/RIGHT to
adjust the settings. Press EXIT to exit the
menu.
7.1 Automatic search
Search and install all channels automatical-
ly. This option overwrites all programmed
channels. Select [Auto Search] and press
OK or RIGHT to start channel search. To
cancel channel search, press EXIT.
7.2 Manual Search
Install new channels manually. This option
adds new channels without changing the
current channel list.
1. Select [Manual Search], then press
the OK or RIGHT button. The channel
search screen will appear.
2. Press the RIGHT/LEFT key to select the
channel frequency.
3. Press OK to start channel search. If the
channel is found, it will be saved and
added to the channel list. If channels
cannot be found, exit the menu.
4. Country - Select your country of resi-
dence.
5. Antenna Power - Power on the antenna
if an external active antenna is connect-
ed.
8. Time setting
To access the menu, press MENU, then
select [Time]. The menu provides options
for adjusting the time settings. Press UP/
DOWN to select an option and press
RIGHT/LEFT to adjust the setting. Press
EXIT to exit the menu.
1. Time Offset - Select auto or manual for
GMT offset correction.
2. Country Region - Select the region of
the country when [Time Offset] is set
to Auto.
3. Time zone - select a time zone offset
when [Time Offset] is set to Manual.
EN
Tabla de contenido
