Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the
equipment. Exercise caution at all times when operating equipment.
1. Read the tractor and snow blade owners manuals and know how to operate your tractor before using tractor with snow
blade attachment.
2. Never operate tractor and snow blade without wearing proper clothing suited to weather conditions and operation of
controls.
3. Never allow children to operate tractor and snow blade, and do not allow adults to operate without proper instructions.
4. Always begin with transmission in first (low) gear and gradually increase speed as required.
SECTION 1:
ASSEMBLY INSTRUCTIONS
NOTE: Right hand (R.H.) and left hand (L.H.) are determined
from the operator's position while seated on the
tractor.
TOOLS REQUIRED FOR ASSEMBLY
(2) 7/16" Wrenches
(2) 1/2" Wrenches
(2) 9/16" Wrenches
(1) 3/4" Wrench or Adjustable Wrench
REMOVING PARTS FROM CARTON
Remove all parts and hardware packages from the carton. Lay
out all parts and hardware and identify using the illustrations
on pages 2 and 3.
NOTE: Not all parts in the hardware pack will be needed
for any one tractor fit-up.
ENGLISH
RULES FOR SAFE OPERATION
LOOK FOR THIS SYMBOL TO POINT OUT IMPORTANT
SAFETY PRECAUTIONS.
BECOME ALERT! YOUR SAFETY IS INVOLVED.
IT MEANS – ATTENTION!
PREPARING THE LAWN TRACTOR
CAUTION:
select a firm and level surface which is large
enough to accommodate the snow blade
attachment and tractor. Engage brake lock.
WARNING:
before installing hitch brackets.
NOTE:
When preparing the lawn tractor for assembly of
snow blade attachment, store all items removed with the
mowing deck.
1. Allow engine, muffler and exhaust deflector to cool before
beginning.
2. Disconnect the spark plug wire(s) from the spark plug(s)
and ground against the engine.
3. Remove the mowing deck as instructed in the belt removal
section of the owner's manual for the lawn tractor.
4. Remove any front mounted attachment which may be
installed on your tractor.
4
Before beginning preparation,
Stop engine and let muffler cool
Tabla de contenido
