Felisatti RH26CVR Manual Del Usuario página 9

1) Attaching
• Set the forward/backward level in neutral
position (locked).
• Place the charged battery from under the handle
of product and push it to its position until you hear
two clicks.
2) Removing
• Press Right/Left button located at the side of
battery.
• Pull the battery backward to remove it.
Be sure to set the Forward/Backward
lever in neutral position when changing
battery or tool, or during transportation
or storage.
4. Battery Level Indicator
1
2
3
4
For checking battery level, "ON" is displayed.
1 = 66~100%(LED 3 bar on)
2 = 33~66% (LED 2 bar on)
3 = 5~33% (LED 1 bar on)
4 = Less than 5% (LED 1 bar blinks)
5. Lighting Feature
1) It is convenient to use lighting feature when
working in a dark place.
2) Pressing the light button with arrow mark to
turn light on and pressing again off.
Light automatically turns off 1 minute after
turning on.
6. Assembling Side Handle and Adjusting
Stopper Position
In case an operation of drilling into
concrete and stone is carried out, be
sure to attach the side handle for safety
before starting operation.
For convenience in operation, assemble the side
handle at the front of tool and perform
Assembling Side Handle
1. Put the forward/backward lever in neutral
position (locked) or remove the battery.
2. Turn the side handle counterclockwise to
unfasten the band and band holder.
3. Turn the side handle to a desired position.
4. Turn the side handle clockwise to completely
fixed.
Band holder
Adjusting Stopper Position
1. Turn the side handle counterclockwise to
unfasten stopper holder.
2. Make adjustment such to let the stopper move
into desired position. (When stopper is used,
boring to the extent as clearance between the drill
bit and stopper is available.)
3. Turn the side handle clockwise and fix it such
that stopper does not move.
Band
Side handle
9